LCBLUECONTROL/W
LCBLUECONTROL/W
- Remotely controlled to enable switching and dimming in any compatible 0-10V LED fixture or circuit
- Direct connect to the Lightcloud Blue mobile app via Bluetooth; no Gateway or Hub required
- For indoor or outdoor applications
- Manually control a fixture's on/off and dim level using the single Controller button
- 5yr no-compromise warranty
Dimensions
Weight: 0.3 lbs
Technical Specifications
Lightcloud
Lightcloud Blue Installed
Lightcloud Blue is a Bluetooth Mesh wireless lighting control system that allows you to control RAB's various compatible devices. With RAB's patented Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system's reach.
DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
Learn more at www.rablighting.com/feature/new-lightcloud-blue.
DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
Learn more at www.rablighting.com/feature/new-lightcloud-blue.
Gateway Required
No
Communication Protocol
Bluetooth Mesh
Range
Indoor: Up to 60 feet between standard building materials. Building materials such as brick, concrete, and steel construction may require additional Lightcloud Blue devices to extend around an obstruction; Up to 200 feet clear line of sight.
Outdoor: Up to 60 feet clear line of sight; Up to 18 feet around corners.
Outdoor: Up to 60 feet clear line of sight; Up to 18 feet around corners.
Spacing Criteria
Lightcloud Blue devices should be placed within the specified range to communicate within the Bluetooth Mesh network.
Factory Reset
Method 1: Delete from App
Open the app and access the device settings for the paired device. Be sure that the device is online and select 'Delete'. The device will flash on/off 3x and return to full brightness.
Method 2: Manual
Locate the device identification button at the top of the Controller under the Lightcloud logo. Press and hold this button for 10s or until the indicator light begins flashing red. If the Controller is attached to a fixture, the fixture will also flash on/off 3x.
Open the app and access the device settings for the paired device. Be sure that the device is online and select 'Delete'. The device will flash on/off 3x and return to full brightness.
Method 2: Manual
Locate the device identification button at the top of the Controller under the Lightcloud logo. Press and hold this button for 10s or until the indicator light begins flashing red. If the Controller is attached to a fixture, the fixture will also flash on/off 3x.
Device Identification Button
Located at the top of the controller under the Lightcloud logo.
Once the Controller has been provisioned to the Lightcloud Blue mobile app this button offers the following functionality:
Press once to rapid identify this device in the Lightcloud Blue mobile app
Press twice to toggle circuit on and off
Press twice and hold to set dim level
Press and hold for 10s to reset the device to factory settings and into pairing mode
Once the Controller has been provisioned to the Lightcloud Blue mobile app this button offers the following functionality:
Press once to rapid identify this device in the Lightcloud Blue mobile app
Press twice to toggle circuit on and off
Press twice and hold to set dim level
Press and hold for 10s to reset the device to factory settings and into pairing mode
Electrical
Status Indicator
The status indicator light is located around the circumference of the top of the Controller.
• Solid Green: connected to a Lightcloud Blue network.
• Blinking Red when unprovisioned
• Solid Green: connected to a Lightcloud Blue network.
• Blinking Red when unprovisioned
Load Switching Capacity
LED/Fluorescent:
120V: 400W
277V: 400W
Incandescent:
120V: 3.3A/400W
277V: 1.5A/400W
120V: 400W
277V: 400W
Incandescent:
120V: 3.3A/400W
277V: 1.5A/400W
Dimmable
Yes when connected to a compatible 0-10V fixture or circuit.
This will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
This will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
Input Voltage
120-277V
Operating Frequency
50/60Hz
Operating Temperature
-22°F to 140°F (-30°C to 60°C)
Performance
Product Type
Lightcloud Blue Controller
Description
Convert any 0-10V fixture or dimming circuit to allow for wireless control. Easily control devices up to 300 feet apart within the Bluetooth mesh network, no need to run additional wire.
Construction
Shape
Cylinder
Finish
White
Enclosure Material
Plastic
Compliance
Listings
UL Listed
Environment
Suitable for use indoors in dry and damp environments.
IP Rating
IP20
IC Rated
No
Air Tight
No
DLC NLC Listed
This system is on the Design Lights Consortium (DLC) Network Lighting Controls (NLC) Qualified Products List and is eligible for rebates from DLC Member Utilities.
DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
DLC system - N1XMLOEATBA (Interior); NHCZ2BIA17L (Exterior)
California Title 20 Compliant
No
California Title 24 JA8 Compliant
No
California Energy Commission (CEC) Status
Lawful for Sales in California
RoHS
Mercury and UV free. RoHS-compliant components.
FCC
Complies with Part 15 of the FCC Rules
Other
Compatible Products
Any fixture or group of fixtures that are 0-10V within the rated load switching capacity. This controller is not recommended for 277 3 Phase WYE applications.
Compatible Accessories
LCLCSENSE/SH
LC & LCB Luminaire standalone PIR sensor
LCLCSENSE/P/EG/A/2
Lightcloud luminaire PIR sensor for EZPAN
LCLCSENSE/M/EG/A
Lightcloud luminaire MVS sensor for EZPAN
LCLCSENSE/M/EG/B
Lightcloud luminaire PIR sensor for SWISH
LCLCSENSE/P/EG/B/2
Lightcloud luminaire MVS sensor for SWISH
LC & LCB Luminaire standalone PIR sensor
LCLCSENSE/P/EG/A/2
Lightcloud luminaire PIR sensor for EZPAN
LCLCSENSE/M/EG/A
Lightcloud luminaire MVS sensor for EZPAN
LCLCSENSE/M/EG/B
Lightcloud luminaire PIR sensor for SWISH
LCLCSENSE/P/EG/B/2
Lightcloud luminaire MVS sensor for SWISH
5-Year, No-Compromise Warranty
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Recently Viewed Products
NDLED4RD-WNHC-W-B
Recessed Downlights 12 Lumens Ndled4Rd 4 Inch Round Universal Dimming Wall Washer Beam Spread 4000K 90Cri White Cone Black Trim
IVAFT-45LPA740KH
Area Lights 5123 Lumens Ivaft Forward Throw 38W Universal Pole Mount 70Cri 4000K Black 347-480V 0-10V Dimming
A17-4T240/480/7PRS
Arealights 34572.4 Lumens A17 Type Iv 240W 5000K 480V Pole Mount 7-Pin Receptacle With Shorting Cap Bronze
SR2/PIR
Led Strip 2Ft 19/15/11/7/4W 3500/4000/5000/5700/6500K Passive Infrared Sensorjbox Adaptor White
NDLED4RD-WNHC-W-B
Recessed Downlights 12 Lumens Ndled4Rd 4 Inch Round Universal Dimming Wall Washer Beam Spread 4000K 90Cri White Cone Black Trim
IVAFT-45LPA740KH
Area Lights 5123 Lumens Ivaft Forward Throw 38W Universal Pole Mount 70Cri 4000K Black 347-480V 0-10V Dimming
